Swimming Pool Maintenance & Remodeling
Swimming Pool Maintenance / Swimming Pool Cleaning
One of the most important steps of swimming pool maintenance here in Katy, Texas is water balance. Generally, understanding water balance can also be one of the most confusing processes of swimming pool maintenance. Because of its detail, some new swimming pool users may not know everything they have to do to keep their pool water safe, comfortable and corrosion free.
Below are a few of the reasons why having a balanced swimming pool is so important:
If you are using a salt pool producing chlorine or a chlorine based tablet pool, then your pH needs to be correct. If pool water is not balanced correctly then the chlorine sanitizer won't be working at full strength killing germs and bacteria.
Your water balance needs to be correct or it will affect your skin and eyes. The pH should be neither too acidic nor basic in order to feel comfortable.
An imbalanced pool can be corrosive to the liner, ladders and hand rail and other equipment such as the swimming pool pump.
What is entailed in Water Balance?
Total Alkalinity -
Total alkalinity refers to how much alkaline is in the water. TA and pH go hand-in-hand. High alkaline water leads to high pH. Low alkaline water leads to low pH. That the average swimming pool should have an alkalinity reading of 100 ppm.
Swimming Pool Water pH Levels -
Keeping your pH levels within the proper range is important for keeping your equipment and pool finish intact. pH refers to the acidity or baseness of your pool water. A proper pH level is around 7.4 to 7.6 on a pH test kit's numeric scale. 0 to 7 reflects a low or acidic pH. 8 to 14 means the pool has a base pH level. Your chlorine will dissolve quicker with a low pH level. High pH levels make chlorine inactive.
Calcium Hardness -
The right amount of calcium in your pool is essential. If there is too little, your plaster can erode. Too much calcium can make your water could become cloudy, scale could form and stains might start. 200 to 400 ppm is the general range for calcium hardness, while 300 ppm is ideal for the average pool.
Stabilizer helps retain your chlorine longer just as insulation helps retain heat or air conditioning. Stabilizer can be added to some chlorine compounds to protect them from the breakdown effects of sunlight. When your stabilizer level is low, you'll use a lot more chlorine. When it's high, you may need to dilute your pool water to bring it back into the 40 to 100 ppm ideal range.
Total Dissolved Solids (TDS)
All water contains dissolved minerals. As pool water evaporates, minerals remain behind and become concentrated. The more concentrated these minerals become, the harder it is for chemical additives to work and stains can form. If you have 3000 ppm or more of total dissolved solids or TDS, you may need to drain some water and add fresh water.
Unbalanced pH levels can cause calcium carbonate to separate from the water and form white, gray or brown patches on your pool tiles. Regular pool maintenance including balancing the water can restore the health of your pool water and prevent future scale buildup. Check your local swimming pool store to find items to help you prevent scale buildup.
1.Test your total alkalinity level to make sure it falls between 80 and 120 ppm. Adjust this level before adjusting your pH.
2.Test your pool water to make sure your pH levels remain between 7.2 and 7.6. Adjust by adding a pH balancer to the water.
3.Keep your calcium hardness level between 200 and 235 ppm; high levels increase the risk for scale. Bring it down by adding soft water. You may also use a scale inhibitor.
4.Prevent scale buildup by following a maintenance schedule for cleaning and testing the balance of your water. Daily testing will ensure your levels remain manageable.
5.Remove light areas of waterline scale buildup by scrubbing with a pool brush or a sponge and a tile cleaner designed for either chlorine or chlorine-free pools.
Swimming Pool Skimmers -
Cleaning the skimmer and pump baskets regularly is important to the overall maintenance of your swimming pool. Clogged baskets make your pump have to work harder to try to cycle the water. This can decrease the life and stress the seals in your pump.
With water flow impeded by baskets full of debris, you are not getting the proper turnover rate to properly filter your pool water. For your pool to stay clean and clear the water must be filtered. With your skimmer and pumps baskets full of debris, you are not pulling as much water to the pump, and not filtering as much water as if the baskets were kept clean. This can have a negative effect on your pool maintenance.
Clean the pool skimmer and pump basket at least once a week by following the directions below:
Cleaning the Pump Basket -
1.Turn off pool cleaner pump and pool heater. If the heater was in operation you should wait 5-10 minutes for the heater to cool down before turning off the pool pump.
2.Close skimmer and main drain valves.
3.If the pool pump is located below the water level in the pool, then turn the filter valve to "closed".
4.Remove pump lid.
5.Use a garden hose to wash the basket. Baskets become brittle over time and can break easily. It is easiest to clean a basket if the contents are allowed to completely dry. Having a spare pump basket to rotate with the dirty basket is the easiest way to perform this task.
6.Inspect the pump basket for signs of damage and replace basket if needed.
7.Re-install pump basket. Some baskets will twist-lock in place. Do not over-tighten the basket.
8.Inspect pump lid and o-ring for cracks or damage and lubricate pump lid o-ring with petroleum jelly if it appears dry.
9.Install pump lid and o-ring. Do not over-tighten.
10.Make sure filter valve is in the "filter" position.
11.Open the main drain valve all the way.
12.Open the air relief valve on the pool filter.
13.Turn pool pump on.
14.Once the pump has caught a prime, open the remaining skimmer valves one at a time.
15.When a steady stream of water is visible out of the air relief valve, close the valve.
16.Turn pool cleaner pump and heater back on if desired.
Cleaning the Pool Skimmer Basket -
1.Turn the pool pump off.
2.Remove skimmer lid.
3.Remove skimmer basket and empty out.
4.Install the basket back into the skimmer.
5.Install skimmer lid and turn the system back on.
Most swimming pool owners have similar complaints about their swimming pool water problems. In ensuring a clean, clear swimming pool, pool maintenance companies main concerns are maintaining or adjusting the chemical balance of the pool water, and removing the unwanted dirt and foreign particles from the swimming pool. Owning a pool is a big responsibility due to the amount of maintenance work you must perform to keep it running safely and efficiently. You need to clean a pool on a regular basis and perform seasonal maintenance operations. Skimming, backwashing, vacuuming, and emptying are some of the tings that must be done by a pool maintenance company.
Katy Pros is your local source for pre-qualified service providers in Katy, Texas.
Cy-Fair Pros is your local source for pre-qualified service providers in Cypress, Texas.
Cypress, TX 77410, 77429, 77433, 77084, 77095
Cy-Fair, TX 77410, 77429, 77433, 77084, 77095
Katy Swimming Pool Service
Cy-Fair Swimming Pool Maintenance /Cy-Fair Swimming Pool Cleaning
Cypress Swimming Pool Maintenance /Cypress Swimming Pool Cleaning
For pre-qualified service providers in other areas www.checkapro.com